An Interim Study of Integrating Spindle, Laser, and Plotter in a CNC Router Machine
Keywords:
spindle, laser, plotter, routing machine, computer numerical control (CNC)Abstract
Although there are so many CNC routers that have been created all around the world, when this manuscript was written, an integrated CNC router with multi different functions was still not common. In this work, we proposed, designed, fabricated, and evaluated a low-cost CNC Router machine that can perform numerous tasks (i.e., spindle engraving, laser, and plotter). Although we first employed a market-available CNC machine, we have developed, changed, and improved almost everything of it so that it can run and go through multiple processes in a single coding process with higher accuracy and efficiency. As a result, the proposed machine is adjusted to conduct an integrated operation without making any significant changes. Through the calibration process, we have validated that the proposed system is capable of performing high-accuracy processes. The proposed CNC router has a wide range of applications and can conduct a variety of engraving procedures, including plotting. Furthermore, when the machine is running, the project runs thru the checks on the accuracy analysis through several processes to ensure the accurate accuracy of the three available processes (spindle, laser, and plotter).
Downloads
References
Rameli, I. M. Sistem Pengaturan Posisi Spindle Pada Mesin Cnc Milling Menggunakan Kontroler Fuzzy-Pd.
Dharmawardhana, M., Ratnaweera, A., & Oancea, G. (2021). STEP-NC Compliant Intelligent CNC Milling Machine with an Open Architecture Controller. Applied Sciences, 11(13), 6223.
Baldovino, R. G., & Rogelio, J. P. (2014, November). A Pulse-Width Modulation (PWM) LASER Power Controller for the 3-Axis Computer Numerically-Controlled (CNC) LASER Machine: Support Program for the Productivity and Competitiveness of the Metals and Engineering Industries. In 2014 International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM) (pp. 1-6). IEEE.
Baldovino, R. G., Rogelio, J. P., Abulencia, G. L., & Macanip, V. Y. (2014, November). Optimization of Machine Process Parameters Through 2D Image Layout Enhancing and Artcam Post-Processing for 3D Machining: Support Program for the Productivity and Competitiveness of the Metals and Engineering Industries. In 2014 International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM) (pp. 1-4). IEEE.
Thomas, D. J. (2013). The Effect of Laser Cutting Parameters on the Formability of Complex Phase Steel. The International Journal of Advanced Manufacturing Technology, 64(9), 1297-1311.
Nayak, R., & Padhye, R. (2016). The Use of Laser in Garment Manufacturing: An Overview. Fashion and Textiles, 3(1), 1-16.
Hasan, M. M., Khan, M. R., Noman, A. T., Rashid, H., Ahmed, N., & Reza, S. T. (2019, February). Design and Implementation of a Microcontroller-based Low-cost Computer Numerical Control (CNC) Plotter using Motor Driver Controller. In 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE) (pp. 1-5). IEEE.
Hasan, Y. M., Shakir, L. F., & Naji, H. H. (2018, May). Implementation and Manufacturing of a 3-axes Plotter Machine by Arduino and CNC Shield. In 2018 International Conference on Engineering Technology and their Applications (IICETA) (pp. 25-29). IEEE.
Lv, Y., Li, C., Jin, Y., He, J., & Li, J. (2021). Energy Saving Design of the Spindle of CNC Lathe by Structural Optimization. The International Journal of Advanced Manufacturing Technology, 114(1), 541-562.
Cekus, D., Skrobek, D., & Zajac, T. (2016). A dynamic analysis of an industrial CNC plotter. Engineering Mechanics, 2016, 109-109
Published
How to Cite
Issue
Section
Categories
Copyright (c) 2022 Rosidah Jaafar, Norfariza Ab Wahab, Basri Bin Bidin, Mohammad Nor Mustaqim Bin Johari, Kaliswaran A/L Mogal, Megat Iskandar Fedileh
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.